Pneumatic angle seat valve

Pneumatic angle seat valve is a kind of guide angle seat valve operated by pneumatic actuator with spring safety protection.

When used, it should be normally open or normally closed. It is made of stainless steel and PTFE.

It can be used in most gas, liquid, steam and corrosive applications.

It has a radiator to protect the actuator and ensure long life of the valve.

IMG_4549

Application fields of angle seat valve:

Pneumatic angle seat valve is widely used in beer, textile printing, dyeing and bleaching, pharmaceutical and medical equipment, food processing, rubber machinery, organic and inorganic chemical industry, cleaning and disinfection, high temperature sterilization, water treatment and other industries.

It is suitable for water, liquid, neutral gas, steam, slightly corrosive gas and liquid.

Compared with other valves, it has the advantages of economic investment, safe use and maintenance free Long life.

IMG_4556

Installation and maintenance

The applicable safety regulations must be observed

1. The pipeline must be clean and pollution-free.

2. Install as required, but with the actuator facing up. Pay attention to the flow direction.

3. When connecting the valve, pay attention to the alignment of the pipeline, and remove the actuator only when the user has special requirements.

4. Cut off the fluid and control air source before opening or repairing the angle valve, and reduce the pressure in the pipeline system.

 


Post time: Aug-31-2020
WhatsApp Online Chat !